EOS Is Shipping a 120 kW Gas Heater to Bathhouse Philadelphia, Five Times the Biggest US-Made Gas Unit

By Arlene Scott
Correspondent, Research and Industry
- Published
- Reading time
- 4 min
SaunaNews is published by SaunaShare, Inc., which also runs SaunaShare.com and SaunaMarketplace.com, where we sell many of the products we write about. That experience may change what we write about and what we don't. Who owns SaunaNews
KUSATEK, the gas-fired commercial line from Harvia-owned EOS Saunatechnik, is coming to America: a 120 kW and a 60 kW system for the 800-plus-square-foot event sauna Bathhouse is building inside Philadelphia’s 1904 Bellevue building. Every install on KUSATEK’s public project list is European, the published spec sheets are too, and the missing US listing is the detail operators should watch.

In this story4 sections
Bathhouse’s Philadelphia location is getting a pair of gas-fired KUSATEK heater systems rated at 120 kW and 60 kW, EOS Saunatechnik announced on LinkedIn last week. They’ll heat an event sauna of more than 800 square feet in the space Bathhouse is building out inside the 1904 Bellevue at Broad and Walnut. For scale: Harvia’s biggest US-listed commercial electric heater, the Virta Pro, tops out at 20 kW, and the biggest American-made gas sauna heater, Scandia’s 80,000 BTU unit, works out to about 23 kW. The larger of the two Philadelphia systems delivers roughly 410,000 BTU per hour by itself.
Adrian Guckelsberger, EOS’s sales director, introduced it in a LinkedIn post as “the most powerful sauna heater engineered for the U.S. market.” EOS is saving the reveal for the finished room. Bathhouse’s site still lists Philadelphia as coming soon with no date, with the entrance at 1418 Walnut Street on the Bellevue block; local reporting puts the opening in mid-2026, in roughly 36,000 square feet that include the former Tiffany & Co. space.
The Philadelphia install at a glance
- Heaters: two KUSATEK gas systems, 120 kW and 60 kW, 180 kW combined (about 615,000 BTU/hr)
- Room: an event sauna of more than 800 square feet, per EOS
- Building: the 1904 Bellevue at Broad and Walnut, Bathhouse’s first location outside New York
- US context: Harvia’s biggest US-listed commercial electric heater is rated 20 kW; the biggest US-made gas unit is 80,000 BTU (about 23 kW)
- Precedent: two 120 kW KUSATEK systems have run Therme Lindau’s theater sauna in Germany since 2021
- Opening: no date from Bathhouse; local reporting says mid-2026
This hardware has been running Germany’s theater saunas for years
KUSATEK is the commercial gas line from EOS Saunatechnik, the German manufacturer that has been majority-owned by Harvia since 2020. The Kusatherm system builds up from individual 10 to 30 kW burner modules into systems of 10 to 120 kW, feeding a double-spiral heat exchanger under as much as 1,500 lbs of stone. It runs on natural gas or propane, and units can be ganged for more output. Every reference install on KUSATEK’s public project list is in Europe; Philadelphia would be its American debut.
The reference install is Therme Lindau on Lake Constance, where two 120 kW systems have heated a theater-style aufguss sauna since 2021. That’s the room type Bathhouse is importing: tiered benches around a central heater, a sauna master, a show. Bathhouse hosted the Aufguss USA Nationals in May and programs aufguss at all three of its New York locations, so an 800-square-foot theater room in Philadelphia is less a novelty than the next unit of a format the company has been scaling all year.
The install is also a Harvia story. The group’s North American growth so far has come from cabins, heaters, and big-box retail, and EOS’s North American catalog, distributed through Harvia’s Texas-based ThermaSol, holds back the big commercial iron: even the 42-to-72 kW Mega HD electric line isn’t offered here. A KUSATEK install at a marquee US bathhouse brings the group’s biggest commercial hardware across the Atlantic.
The math that gets you to gas
Run the sizing rule printed in most heater manuals, roughly 1 kW per 45 cubic feet of hot room, against an 800-square-foot sauna with 10-foot ceilings and you need somewhere around 160 to 180 kW. The two systems EOS announced total exactly 180.
Feeding 180 kW of electric heat means dedicating about 217 amps of 480-volt three-phase service, or 500 amps at 208 volts, to sauna heaters alone. In a 122-year-old building that already houses a hotel and a 100,000-square-foot athletic club, that service upgrade is a fight with the utility and the riser closets. Gas trades it for a different problem: flue routing and combustion air through a historic high-rise, which is a real permitting project but a mechanical one, solvable with money and a good engineer rather than a utility queue.
EOS hasn’t said how the heaters are listed for the US
What EOS hasn’t published is the certification story. KUSATEK’s published spec sheets list DVGW certification and CE approval under the EU gas appliance regulation; a US installation will need a US listing or engineering evaluation, and EOS has not said which path it took. Philadelphia permits gas appliances under a fuel gas code based on the International Fuel Gas Code, which wants equipment listed and labeled by a recognized testing lab, or an engineering evaluation in its place.
“Engineered for the U.S. market” implies a 60 Hz, US-code version of the line now exists, and an installation actually proceeding in Center City Philadelphia implies the approvals conversation is further along than the public spec sheets. Electric heaters are mid-transition to a new UL standard of their own, so certification is in flux for gas and electric heaters alike.
Gas raises the heat ceiling for US event saunas
Bathhouse opened Atlantic Avenue in May with an event sauna that holds more than 100 guests, which Aufguss USA organizers called the largest in the country. The Philadelphia room plays in the same class, and the ceiling on rooms like these has always been heat: US operators have been stacking the biggest electric heaters the market sells and stopping where the switchgear stops.
A proven 10-to-120 kW modular gas line entering the US raises that ceiling to 120 kW per system in one step, before you start ganging units. Bathhouse, still spending its $35 million from Imaginary Ventures on a multi-city buildout, is the first US buyer. Other operators now have a supplier to call.
Ask EOS for three things in writing
For an event sauna opening in 2027, get three things from EOS in writing before you design around KUSATEK: the US listing the heaters carry, the venting and combustion-air spec, and the lead time. And watch the Bellevue install through permitting, because the first big gas sauna through a major US city’s approval process sets the template everyone else will follow.
For a different scale of gas-fired sauna heating, SaunaLife’s TITAN SL1 uses a portable propane supply for small sauna rooms and its SaunaTrekker tents.



